Suzuki DL650A L2– Installation Instructions página 2

2/10
WARNING / CAUTION / NOTICE / NOTE
Important
Please read this manual and follow its instructions carefully. To empha-
size special information, the symbol  and the words WARNING, CAU-
TION, NOTICE and NOTE have special meanings. Pay particular
attention to messages highlighted by these signal words:
Indicates a potential hazard that could result in death or serious
injury.
Indicates a potential hazard that could result in minor or moder-
ate injury.
Indicates a potential hazard that could result in vehicle or equip-
ment damage.
NOTE: Indicates special information to make maintenance easier or
1. Check that the kit includes all the parts listed in the first page.
Precautions
for
2. Check each part in the kit for scratches or any form of damage.
Installation
3. Park the vehicle on a level ground.
4. Remove the ignition key from the switch and store it in a safe place.
5. Protect any items removed or to be installed from scratches by plac-
ing them on a soft cloth first before putting them on the ground.
6. Use care not to cause any damage to the body of the vehicle during
installation of the accessory.
On condition that the battery voltage is low, LED turn signal lamps
may blink faster. Check that LED turn signal lamps are working nor-
mally before starting engine of the bike.
If LED turn signal lamps blink faster, charge the battery and make sure
that all turn signal lamps are normally working.
GENUINE SUZUKI ACCESSORIES
instructions clearer.
WARNING
CAUTION
NOTICE
NOTICE