Suzuki DL650A L2– Installation Instructions página 10

10/10
5. Connect the Lead Wire B to
the LED Turnsignal A.
Connect the Lead Wire B to
the vehicle harness. (black cou-
pler ---> right, gray coupler --->
left)
Be sure that the right and left LED turnsignal blink and hazard blink
operate normally.
If operation is OK, install the Rear frame cover and the Sport carrier in
the reverse order of removal.
NOTE: Adjust the right and left
GENUINE SUZUKI ACCESSORIES
turnsignal to be the same
direction. (90 degrees to
the ground)
Black coupler (RH) Black coupler (RH)
Gray coupler (LH) Gray coupler (LH)
Lead Wire B Lead Wire B
Lead Wire B Lead Wire B