Hergom L-05 Instrucciones Para La Instalación, Uso Y Mantenimiento página 12

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

- Top. Robust and carefully sanded grey cast hob – polished, framed by an enamelled
cast iron frame.
- Grate rising mechanism. The capacity of the hearth is achieved, in this model, by
changing the height of the grate, operating an endless screw. Access is via the ash
cover, where the relevant handle will be found on the inside of the said cover. (Fig. 1).
- Heat resistant top cover. The top cover is made of steel with a vitreous porcelain
enamel finish and features insulation material inside.
When the cooker is in use but not required to prepare food, the top cover may be
lowered with a view to limiting heat loss, if the operational temperature is not too high.
When using at full power, we recommend lifting the cover to avoid damaging the
enamel.
The Hergóm L-05 C.C.E. cooker is supplied in one piece (already assembled) and only
requires connecting to the chimney and to the heating system.
Connection to a metal chimney is recommended following the instructions provided in
the manual for professional installers.
ATENTION. It is very important to maintain a gap of approximately 50 mm. between the
cooker and the nearest pieces of furniture. Radiation to nearby furniture may be
reduced by protecting the areas or sides of the cooker with insulating materials, rock-
fibre, ceramic fibre or similar products.
I.- FEATURES
- Front and sides. The cooker front, columns, fire
door and ash compartment are made of cast iron
with a vitreous porcelain enamel finish and
polished brass hinges.
The sides are made of steel sheets with an enamel
finish that matches the front and doors.
We recommend using a damp cloth with soapy
water for cleaning. Avoid the use of strong
detergents, acids or abrasive products that may
damage the enamel. Dry with a dry cloth.
II.- ASSEMBLY
12
Tabla de contenido
loading

Tabla de contenido