Tools And Materials; Before You Begin - Kohler K-8548 Guia De Instalacion

Ocultar thumbs Ver también para K-8548:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Adjustable
Tape
Wrench
Measure

Before You Begin

WARNING: Risk of personal injury. This product is a diverter
valve only and should never be used as a shut-off valve. Doing
so would allow cross flow between the hot and cold water
supplies and create a serious scalding hazard.
Observe all local plumbing and building codes.
Shut off the main water supply.
Provide an access panel for all installations.
This diverter can be installed to decks with a maximum thickness
of 1-1/4" (3.2 cm).
Carefully inspect waste and supply tubing for any sign of
damage. Replace if needed.
NOTE: Plumbing codes may require a vacuum breaker be installed
in-line to handshowers. Please consult with local plumbing codes. If
a vacuum breaker is required, ensure that it is not installed between
the handshower high pressure and interlock hoses.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
1000588-2-C
Solder
3/32" Hex
Wrench
2
Propane
Torch
Kohler Co.
Tabla de contenido
loading

Este manual también es adecuado para:

K-8549K-10342

Tabla de contenido