Tools And Materials; Before You Begin - Kohler K-3493 Guia De Instalacion

Ocultar thumbs Ver también para K-3493:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Tools and Materials

Supply
10" Adjustable
Shut-Off
Wrench
Valve
Tubing Cutter
Wax Seal
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Before You Begin

WARNING: Risk of personal injury or water damage. Contents
of the vessel are under pressure and can cause severe injury. Do
not open or service before reading these installation instructions
or service instructions. Turn off the water supply and flush the
unit to release pressure before attempting any service.
WARNING: Risk of personal injury or product damage. Handle
with care. Vitreous china can break or chip if the bolts and nuts
are overtightened, or if the product is handled carelessly.
CAUTION: Risk of product damage. Do not use any oils or
lubricants on or in the pressure system.
Observe all local plumbing and building codes.
Carefully inspect the new toilet for damage.
If the existing toilet does not have a supply shut-off valve below
the tank, install one before installing the new toilet.
1044956-2-B
Tape
Sponge
Level
Measure
Plus:
• 5/16" T-Bolts with Nuts
and Washers
• Metal File
• Toilet Supply Tubing
Safety
• Hacksaw
Glasses
• Screwdriver
2
Putty Knife
Kohler Co.
Tabla de contenido
loading

Este manual también es adecuado para:

K-3505K-3554

Tabla de contenido