12.
Attach LH Leg & Hinge Assembly to table top as shown in Figure 7. Position Leg exactly as shown with straight side of leg toward end of table with corner
protector and attach with bolt (#16), Spacer (#26) and Locknut (#18) on angled end of leg. Use bolt (#15), Spacer (#26) and Locknut (#18) on
straight leg end. Tighten snug but do not over tighten, leg must pivot.
13.
Attach Left Hand Hinge on Connecting End Rail Tube with Screw (#20), Plastic Washer (#23) and Locknut (#22). IMPORTANT: Hinge must operate
as shown or the leg will not fold to storage position. Tighten snug, but do not over tighten, hinge must pivot.
14.
Attach Right Hand Hinge on Connecting End Rail to leg with Screw (#21), Plastic Washer (#23) and Locknut (#22). IMPORTANT: Hinge must
operate as shown or the leg will not fold to storage position. Tighten snug, but do not over tighten, hinge must pivot.
15.
Attach RH Leg & Hinge Assembly to table top as shown in Figure 7. Position Leg exactly
as shown with straight side of leg toward end of table with corner protector and attach
with bolt (#16), Spacer (#26) and Locknut (#18) on angled end of leg. Use bolt
(#15), Spacer (#26) and Locknut (#18) on straight leg end. Tighten snug but do not
over tighten, leg must pivot.
16.
Attach Right Hand Hinge to Connecting End Rail Tube with Screw (#20), Plastic
Washer (#23) and Locknut (#22). IMPORTANT: Hinge must operate as shown or
the leg will not fold to storage position. Tighten snug, but do not over tighten, hinge
must pivot.
15
17.
Attach Left Hand Hinge on Connecting End
Rail to leg with Screw (#21), Plastic Washer
(#23) and Locknut (#22). IMPORTANT:
Hinge must operate as shown or the leg will
not fold to storage position. Tighten snug, but
do not over tighten, hinge must pivot.
21
23
22
RH Hinge
18
26
21
23
22
15
LH Hinge
18
26
LH Leg Hinge
Assembly
LH Hinge
23
20
18
22
26
16
5
RH Leg Hinge
Assembly
RH Hinge
26
20
23
22
Figure 7
16