Technical Data; Safety Instructions - Klarstein 10003469 Manual Del Usuario

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following
hints to avoid damages. Any failure caused by ignoring the mentioned items and cautions mentioned in the
instruction manual are not covered by our warranty and any liability.
Item number
Power supply
Power consumtion
Placement
• Position your wine cellar so that the plug is accessible.
• Keep your wine cellar out of direct sunlight.
• Do not place next to heat generating appliance.
• Do not place directly on the ground. Provide suitable stand.
Room Temperature
• The wine cellar will have better performance at ambient of 20-25 degree; We suggest the wine cellar be
powered off if the ambient temperature is lower than 10 degree.
• After plugging the appliance, allow the unit to cool down for 2-3 hours before placing beverage into the
cellar compartment.
• Ventilation is very important for this kind thermoelectric wine cellar; The inside PCB will be broken easily if
the ventilation is bad; lt will also reduce the life of the wine cellar.
If leakage occurs:
• Switch off the wine cellar immediately.
• Ventilate the room thoroughly.
• Call for the after sales service department.
Power supply
• The wine cellar must be connected to a properly earthed socket in line with relevant valid country regulati-
ons before operating.
• Check the data label (which is on the side of the wine cellar) for voltage and frequency corresponds to your
local one; If not, don't plug your cable into the socket.

Technical Data

10003469
220-240 V ~ 50-60 Hz
83 W

Safety Instructions

6