BGS technic 8794 Manual De Instrucciones página 7

Step 4:
Before installing the exhaust camshaft, be sure
that the hydraulic valve clearance component and
valve spring both are on the correct position.
Step 5:
After finishing up replacing the entire camshaft
putting, put the lower lid of camshaft back to the
original position.
Step 6:
Embed the exhaust camshaft back.
Step 7:
Please particularly note the following, while
embedding the exhaust camshaft, the mark, which
is on the exhaust camshaft should be face-up and
align at an angle of 90 degree horizontal with the
cylinder.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
[email protected]
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed