Tabla de contenido
To synchronize the remote control with the hoist, please, connect the hoist to the
power supply.
(Electric installation manual). Press together the «Up» and the «Down» buttons on
the remote control and hold for 5-8 seconds. Then release.
After synchronization, the remote control switches to normal operation mode.
Backup connection of the keyboard control
Backup connection of the keyboard control connector. In case of malfunction or
loss of the remote control it allows to control the hoist in a service mode.
Backup control connection diagram
Connection diagram of the keyboard control to the backup control connector
Attention
1. Direct the remote control at the hoist.
2. The best distance between the remote control and the hoist is 15 m.
З. Keep the remote control away of sources of light and heat.
4. Do not drop or throw the remote control.
EN
24
Package contents:
Rotating hoist ____________________________________________________ 1 Set
Anchor bolts ______________________________________________________ 1 Set
Decorative cover __________________________________________________ 1 Set
Remote control ___________________________________________________ 1 Set
User's manual ____________________________________________________ 1 Set
Package box _____________________________________________________ 1 Set
Warranty
The manufacturer agrees to fulfill the warranty obligations under the conditions of
storage, transportation, handling, maintenance and installation of the hoist as
described in the previous sections of this manual. The manufacturer is responsible
for the warranty in accordance with the legislation of the country where the hoist
was purchased. The consumer is obliged to regularly check the quality of the
lighting fixture installation and absence of any evidence of damage to the
suspension elements. If damage is detected or occurs as a result of installation or
after it, the consumer is responsible for such damage.
Complaints regarding the quality of the product are accepted only when providing
documents with the store's seal and the date of sale. The Manufacturer and the
Dealer are not responsible for defects caused by the fault of the Consumer.
To avoid any misunderstanding, please, keep the attached documents to the
lighting fixture (receipt and operating manual) until the end of the service life of
the hoist.
Violation of the manufacturer's seal on the Product leads to the cancellation of the
warranty.
This warranty is provided by:
Regenbogen Leuchten GmbH, Bismark Strasse 45, Berlin, 10627, Germany.
25
EN
Tabla de contenido
