Instructions for Use
Powering up:
This appliance has a polarized plug (one blade is
wider than the other). This plug fits into a polarized
outlet only one way. If the plug does not fit fully into
the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper
outlet. Do not change the plug in any way.
The massager is powered by and comes equipped
with a UL approved cord. Always make sure unit is
set to the "Off" position before inserting the plug
into a 120 volt household electrical outlet. Red light
on unit will illuminate.
Selecting Massage Type:
Press the "Kneading High", Kneading Low", or
"Vibration Massage" button on control. See pages
10-11 for more detail.
Note: Vibration function works with Kneading
massage turned on or alone.
Control can be left in its cradle -
or can be picked up and held in your hand. If hand
held, point red end of remote toward infrared eye in
remote's cradle when pressing buttons.
Note: Control will only work if pointed toward
infrared eye unit up to a four foot range.
8
Selecting Massage Direction:
Massage direction can be set by pressing "Direction" button on
control during "Kneading High" or Kneading Low" functions.
Changing massage "direction" allows for either a top-to-bottom
or bottom-to-top massage.
Activating or Changing Functions:
• Pressing any function once will turn that function "on".
• You may move from one massage function to another by
pressing a different function button.
• Any active function can be turned off by pressing the "off"
button at top of control, or any active function can be turned
off by pressing its button again.
Replacing Remote Batteries:
Remote operates on 2 AAA batteries (included). When batteries
need replacing,
• Press battery release tab (Fig. 3)
to remove cover.
• Insert batteries 2 AAA batteries
into the chamber as directed on
bottom of compartment. Replace
battery cover.
• Do not dispose of batteries in fire -
may cause batteries to explode
or leak.
9
Fig. 3