MSW POL560C Manual De Instrucciones página 5

USER MANUAL
M S W - P O L 5 6 0 C
M S W - P O L 1 2 0 C
M S W - P O L 6 0 C
expondo.de
SYMBOLS
The operation manual must be reviewed.
Never dispose of electrical equipment together with household waste.
This machine complies to the CE declarations.
Protective goggles must be worn.
Ear protection must be worn.
Safety mask must be worn.
This is a device of the 2nd protection class with double insulation.
PLEASE NOTE! Drawings in this manual are for illustration purposes only and in some details it
may differ from the actual machine.
The original operation manual is in German. Other language versions are translations from German.
GENERAL OPERATIONAL PRECAUTIONS
1. Keep the work area clean. Cluttered areas can cause injuries.
2. Consider the work area environment. Don't expose power tools to rain or wet soil. Don't use power
tools in damp or wet locations. The work area should be well protected. Don't use the tool in the
presence of flammable liquids or gases. Power tools produce sparks during normal operation or
when switching ON/OFF. Never use power tools in dangerous sites containing lacquer, paint, benzene,
thinner, gasoline, gases, adhesive agents, and other materials which are combustible or explosive.
3. Provide sufficient protection against electric shock. Prevent body contact with grounded surfaces, such
as for example: pipes, radiators, ranges and refrigerator enclosures.
4. Keep children and third parties away from the work area.
5. Store unused tools. When not in use, all tools should be stored in a dry and high or locked place, out
of the reach of children.
6. Do not overload the machine! To ensure an optimum in the performance and safety of the machine, it
should only be used within the set parameters.
7. Use only suitable tools. Don't use tool or attachment for tasks for which they are not intended. For
example: Don't use circular saw for cutting tree limbs or logs.
8. Dress properly. Do not wear loose clothing or jewelry. They can get caught in moving parts. Rubber
gloves and nonskid footwear are recommended when working outdoors. Wear protective hair
covering to contain long hair.
9. Wear protective goggles. Dust masks should be worn in dusty work.
10. Do not damage the connection cable. Never carry tool by cord or yank it to disconnect it from the
power source. Keep cord from heat and oil sources and sharp edges.
11. Secure the work area. It is recommended to use clamps or a vice for fixation. Please pay special
attention to your hands when operating the machine!
12. Do not overreach yourself. Keep proper footing and balance at all times.
13. Hold the machine firmly in both hands. When using the machine, hold it by the handles which are
provided with the machine.
14. Keep all tools in good condition. Keep the tools clean for better and safer performance. Follow the
instructions for lubricating and renewing the accessories. Inspect extension cords periodically and
replace if damaged. Keep handles dry, clean, and free from oil and grease.
15. Switch off the machine and disconnect the cable before maintenance or changing accessories (chisel,
drill, and knife).
16. Remove the adjusting keys and wrenches. Always make sure that keys and adjusting wrenches are
removed from the tool before turning it on.
Rev. 10.05.2017
9