Model 1923 | Owner's Manual |
!
WA R N I N G
Do not lean over griddle
while lighting.
!
WA R N I N G
If ignition does NOT
occur in 5 seconds, turn
burner controls OFF, wait
5 minutes and repeat
lighting procedure.
If burner does not ignite with
open valve, gas will continue
to flow out of burner
and could accidentally/
inadvertently ignite with
risk of injury.
38
Ignition | Battery Powered
IGNITION |
BAT TERY POWERED
GRIDDLE OPERATING INSTRUCTIONS
For proper ignition and operation of the griddle follow the steps below.
S T E P 0 1
In order for the
igniter switch to work prop-
erly, please make sure battery is
correctly installed.
S T E P 0 2
Turn OFF gas burner
control knobs.
S T E P 0 3
Turn gas ON at LP
cylinder by taking 20 seconds to
turn knob halfway.
S T E P 0 4
To ignite, push and turn
IGNITION BURNER knob to MAX.
S T E P 0 5
Push and hold
ELECTRONIC IGNITION button
until IGNITION BURNER lights.
S T E P 0 6
To ignite remaining
burners, turn each burner knob
in sequence to MAX position.
Start with burner closest to
IGNITION NEEDLE.