Baby Jogger city GO i-Size Manual De Instalación página 17

27 Identify Your Seat Belt Type
There is only one type of vehicle seat belts that can
be used with this car seat: Combined Lap & Shoulder
Seat-belt 3 connections points.
ACCESSORIES
28 HEAD SUPPORT
Use only with infants up to 60 cm. To remove, slide
out from behind the headrest pad.
29 BODY SUPPORT
Use only with the lowest two sets of harness slots. To
remove, unbuckle the buckle and remove the body
support.
30 Harness Covers
To remove, undo the fastening strips and remove.
CLEANING SEAT COVER
31 Unsnap the four buttons on the seat cover.
32 Pull out the 4 plastic flaps from the side of the seat.
33 Pull cover off the shell.
34 To remove canopy from the canopy hoop, first press
release tab and remove from mounting bracket, then
slide the canopy off the hoop to remove the canopy.
Machine wash cover and canopy in cold water on
delicate cycle and drip dry. DO NOT USE BLEACH.
Reverse the steps to reattach the cover to the shell.
Make sure the harness straps are not twisted.
CLEANING CROTCH BUCKLE
WARNING! Inspect and clean buckle from time to time
to remove any objects or debris that could prevent
latching.
35 To clean buckle, place in a cup of warm water and
gently agitate the buckle. Press the red button several
times while in the water.
17
EN