Tabla De Contenido; Important Information To Be Observed Before Operation; Safety Information; Intended Use - Riester ri-focus Manual Del Usuario

INHALTSVERZEICHNIS
1. Important information to be observed before operation
2. Unpacking / Basic configuration
3. Preparation before putting into service
4. Putting into service
5. Repairs
6. Recommendations for treating fibre optics headlights
7. Technical specification
8. Accessories
9. Replacement parts
9. Warranty
1.

Important information to be observed before operation

You have purchased a high quality RIESTER product, which has been manufactured according to the Directive 93/42/EEC and is sub-
ject to the strictest quality controls at all times.
These Instructions for Use describe the use of the cold-light headlight ri-focus® CL and its accessories.
Please read the Instructions for Use carefully before putting the unit into operation and keep them in a safe place.
If you should have any questions, your responsible RIESTER product representative will be available to answer queries at any time, or
contact us directly. Our address can be found on the last page of these Instructions for Use. The address of our sales
representative will be provided upon request.
Please note that the instrument described in these Instructions for Use is only to be used by suitably trained personnel.
The user should ensure that the instrument is working safely and is in good condition before use.
Furthermore, please note that the perfect and safe functioning of our products is only guaranteed when both the products as well as the
accessories used are from Riester.

Safety information:

Caution: Observe the operating instructions!

Intended use

The headlights described in these Instructions for Use have been manufactured to illuminate the area to be examined.
2.

Unpacking / Basic configuration

Remove the instrument and its accessories carefully from the packaging.
Check that everything is complete and for any possible damage during transport.
If the shipment is damaged, please contact us or your supplier.
The product supplied contains the following equipment:
• Headlight or head mirror
• Operating instructions
3. Vorbereitung zur Inbetriebnahme
Ensure that the correct adapter is attached to your fibre optics.
An incorrect connection to the fibre optics cause damage to the cold-light projector.
Furthermore, considerable light loss may arise, as the light incidence end of the fibre optics cannot be correctly positioned in the
adapter.
Seite
3
3
3
4
4
4
4
5
5
5
3