Craftsman CMXGRAM1130043 Manual De Instructiones página 6

247 ASSembLy
Step 4: (fig. 4)
1. Hook the Sleeve Hitch Frame assembly onto the
shoulder bolts of the tractor frame. Attach the bottom
of the assembly to the tractor hitch using a 5/8" x 1-34"
hex bolt (B) and a 5/8" nylock nut (H).
SLEEVE HITCH
Fig. 4
FRAME ASSEMBLY
SHOULDER
BOLT
Step 5
1. Proceed to LIFT ASSEMBLY instructions.
Cmx ASSembLy
Step 4: (fig. 4)
1. Hook the Sleeve Hitch Frame assembly onto the
shoulder bolts of the tractor frame. Attach the bottom
of the assembly to the tractor hitch using a 5/8" x 1-34"
hex bolt (B) and a 5/8" nylock nut (H).
SLEEVE HITCH
Fig. 4
FRAME ASSEMBLY
SHOULDER
BOLT
Step 5
1. Proceed to LIFT ASSEMBLY instructions.
4
LIFT LEVER
ASSEMBLY
HEX BOLT
5/8" x 1-3/4"
(B)
5/8" NYLOCK NUT
(H)
LIFT LEVER
ASSEMBLY
HEX BOLT
5/8" x 1-3/4"
(B)
5/8" NYLOCK NUT
(H)
Lift ASSembLy
Step 1: (fig. 1)
1. Assemble the two 5/8" jam nuts (G) halfway onto the
two 5/8" x 2" hex bolts (A). Screw the bolts into the
nuts that are welded to the Sleeve Hitch Lift Assembly.
Tighten the jam nuts against the welded nuts.
2. Assemble the Lifting Link to the Sleeve Hitch Lift
Assembly using a 5/8" x 1-3/4" hex bolt (B) and a 5/8"
nylock nut (H). Use the bottom hole in the Lifting Link
(gives the lowest implement depth setting). Tighten
the nut only until snug. Do not squeeze welded arms
together.
LIFTING LINK
Fig. 1
5/8" NYLOCK NUT
(H)
5/8" JAM NUT
(G)
5/8"x 2"
HEX BOLT
(A)
Step 2: (fig. 2)
1. Attach the Sleeve Hitch Lift Assembly to the Sleeve
Hitch Frame Assembly using three 5/8" x 1-3/4" clevis
pins (F) and 3/32" hair cotter pins (P).
2. Install the Hitch Pin in the sleeve hitch and secure it with
the 5/32" hair cotter pin (Q).
Fig. 2
(3) CLEVIS PINS
(F)
5/8"x 1-3/4"
HEX BOLT
(B)
HITCH PIN
5/32" HAIR
COTTER PIN
(3) 3/32" HAIR (Q)
COTTER PINS
(P)