Baby Jogger City Go Manual Del Usuario página 11

SAFE VEHICLE SEAT BELTS
1
2
3
4
The following vehicle belt systems are SAFE to use for
child restraint installation.
If available, LATCH should be used IN PLACE OF these
vehicle belt types. Refer to your vehicle owner' s manual
for LATCH locations.
1 Lap Belt with Locking Latch Plate - The vehicle belt is
tightened by pulling on the free end of the strap until
the belt is tight.
2 Lap Belt with Automatic Locking Retractor (ALR)-
The automatic locking retractor does not allow the lap
belt to get longer once it is buckled. The vehicle belt
is tightened by feeding the seat belt webbing into the
retractor.
3 Lap/Shoulder Belt with Locking Latch Plate - The lap
portion of this belt does not loosen once the belt is
buckled. The vehicle belt is tightened by pulling up
hard on shoulder belt and feeding the webbing into
the retractor.
4 Lap/Shoulder Belt with Sliding Latch Plate - The latch
plate slides freely along the lap/shoulder belt. Vehicle
belts with sliding latch plates are typically locked at the
retractor by pulling all of the webbing out slowly to switch
the retractor. The vehicle belt is tightened after switching
the retractor by pulling up hard on shoulder belt and
feeding the webbing into the retractor.
11