Introduction; Operating - Husqvarna W548 Manual Del Operador

INTRODUCTION

This manual is a valuable document. Read the
contents carefully before using or servicing the
machine. The following of instructions (use,
service, maintenance) by all who operate this
machine is important for the safety of the operator
and others.
The engine is covered by a separate manual.
The manual is included in the literature package
shipped with the mower. Refer to this manual for
engine service recommendations.
General
In this operator manual, left and right, backward
and forward are used in relation to the machine's
usual operating direction.
Transport on Public Roads
Check applicable road traffic regulations before
transporting on public roads. If the machine is
transported, you must use approved fastening
equipment and ensure that the machine is well
attached.
Service
When ordering spare parts, please specify the
purchase year, model, type, and serial number.
Use genuine Husqvarna spare parts.
Numbers are located on the product registration
form in the unit literature package. They are
printed on a serial number label, located on the
frame of the mower near the engine.
Engine serial numbers are on the left side of the
engine and also below the dipstick tube.
4

Operating

This machine is constructed only for mowing
grass on lawns and even ground without
obstacles such as stones, tree stumps, etc. The
manufacturer's directions concerning operation,
maintenance, and repairs must be carefully
followed.
Lawn mowers and all power equipment, can
be potentially dangerous if used improperly.
Safety requires good judgment, careful use in
accordance with these instructions and common
sense.
The machine must only be operated, maintained,
and repaired by persons familiar with the
machine's special characteristics and who are
also knowledgeable about the safety instructions.
Use only approved repair parts to maintain this
machine.
Accident prevention regulations, other general
safety regulations, occupational safety rules, and
traffic regulations must be followed without fail.
Unapproved modifications to the design of the
machine may absolve the manufacturer from
liability for resulting personal injury or property
damage.
Unit Model and Serial Number
Engine Model and Serial Number