Setup Instructions - Polygroup SUMMER WAVES Manual Del Usuario

1. THE PRODUCT SUITS FOR 10'-20' FRAME POOLS.
2. CHECK TO MAKE SURE THE VERTICAL BEAMS OF YOUR POOL BELONG TO ONE OF THE
BELOW SHAPES AND SIZES:
Shape
Size
Position of Fitting Block
3. Align the Fitting Block with the correct position number (see above) and slot
the fitting blocks into the Frame Clamps. You should hear a click when
secured.
NOTE: Before moving to the next step, make sure the Fitting Block is in the
correct position. With the frame clamp, if not, refit the Fitting Block by:
a. Pressing both the snaps towards the center, and
b. Pushing the Fitting Block out of the Frame Clamp.
4
3
2
1
5. Install the assembled Fixing Poles onto the pool vertical beams.
NOTE: Open or close the Clamps CAREFULLY to avoid breaking them.
4

SETUP INSTRUCTIONS

A B
66 mm Width 60 mm Width
D-shaped D-shaped
1 2
"Click"
Fitting Block
C D
55 X 35 mm Oval 1.5" Round
3 3
4. Insert and secure the Fixing Poles to the Frame Clamps.
6. Hook the top and bottom Net Lock Ropes onto the Fixing Pole,
and fasten the lock buttons around the hook to secure.
E
1.25" Round
4