Troubleshooting; Safety And Notice - Melchioni Family VERMENTINO NEW 12 Manual De Usuario

9. TROUBLE SHOOTING
In case of problems, consult the suggestions below before contacting our service center
PROBLEM
Thermoelectric cooler do not operate.
Thermoelectric cooler is not cold enough.
The light does not work.
Vibrations.
The thermoelectric cooler seems to make
too much noise
The door will not close properly.
LED could not display.
LED display error.
Bottoms are not functional.

10. Safety and notice

1. This machine is designed to be only used in "SN, N" climate.
2. Upon receipt and inspection of the unit, if supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in order to avoid a hazard
For any additional information or questions, please contact the service center.
WARNING: please do not uses where children can touch the unit, nor let children use the
unit by themselves.
CAUSES
Not plugged in using different voltage. The circuit
breaker tripped or a blown fuse.
Check the temperature control setting.
External environment may require a higher setting.
The door is open too often.
The door is not closed completely.
The door seal does not seal properly.
The appliance does not have the correct clearance.
Check the service center.
Check to assure that the thermoelectric cooler is level
The thermoelectric cooler is not level.
Check the fan.
The thermoelectric cooler is not level.
The doors were reversed and not properly installed.
The seal is weak.
The shelves out of position.
Main control board does not work.
PCB Problem.
There is some problem with the plug.
Weak quality of display.
Temperature point is out off.
Temperature controller panel is damaged.
16
.
.