Bimar PA100 Manual De Instrucciones página 15

 Should the appliance fail or not work correctly, disconnect the
power cord immediately. Check that it is not damaged, and
thereafter turn it back on: if in any doubt, consult a qualified
professional.
 Do not pull on the power cord or the appliance itself to unplug
the appliance from the plug point.
 Do not pull on the power cord to move the appliance.
 Do not use the appliance if it does not work properly or if it
appears damaged; when in doubt, contact a qualified
technician.
 Check the condition of the appliance periodically. If there are
any faults or when in doubt consult a qualified professional.
 If the appliance is not being used, unplug it from the plug
point.
Warnings and safety of the UV lamp
Only use the appliance with the lamp correctly positioned in its
housing. Do not use the UV-C lamp outside of the appliance.
Warning: never directly connect the UV lamp (mod.388L) when it
is lit; it could damage the skin, or cause temporary loss of and / or
decreased vision.
Look at the lit lamp only through the rear grille.
Any repairs and / or replacements (first remove the plug from the
socket) must only be done by professionally qualified persons.
INSTALLATION
 After unpacking, check that all parts of the appliance are present; if in doubt, do not
use and contact a qualified technician. The packaging materials (plastic bags,
polystyrene, metal staples, etc.) must not be left within reach of children, as they are
15/52