Tabla de contenido
Idiomas disponibles
Idiomas disponibles
NOTICE – Gives recommendations and important hints for handling the product
IMPORTANT – Indicates application advice and other particularly useful information.
This symbol
has the
REMARK:
following
meaning:
In each case the symbol used does not replace the safety text. The text must always be read fully. In
some cases other symbols will be used with the signal words.
Operating pressure
Drilling in masonry
Length with drill chuck
Sound pressure level L
Sound power level L
ATEX Classification
Remark: Measurement acc. to DIN EN ISO 15744
(1)
Remark: Measurement acc. to DIN EN ISO 28927-5
(2)
The performance specifications are guide values only, they depend basically on the application, the working
pressure and the accessories used.
These machines are designed for commercial/industrial use only.
Only trained, skilled personnel are allowed to operate the machine.
The hammer drill serves for drilling:
•
Wood, plastic, non-ferrous metal, cast iron, steel and stainless steel and for hammer drilling:
•
Concrete, stone and masonry.
It can be applied for:
•
Chemical industry / refineries, nuclear industry, body construction and ship building industry, construction.
The hammer drill can be used for underwater work as well. The machine must be held tight against rotation.
Make use of the second handle during hammer drilling.
Any use deviating from the intended use as described is considered to be improper use.
•
Working without personal protection equipment.
•
Using the machine in an inadmissible area.
•
Drilling self-flammable material.
TECHNICAL SPECIFICATION
Power
Free speed
Drill chuck
Drilling in steel
Reversible to
Air consumption
Air connection
Weight
(1)
pA
WA
Vibration
(2)
Measurement uncertainty K: 3 dB (A)
Measurement uncertainty K: 1.5 m/s
INTENDED USE
IMPROPER USE
6 bar
500 W
950 1/min
up to Ø 13 mm
max. 13 mm
max. 20 mm
Hammer drilling
0.6 m
/min
3
R 1/4" female
3.3 kg
approx. 300 mm
84 dB (A)
95 dB (A)
<2.5 m/s
2
II 2 G c T6
2
23
Tabla de contenido
