THERMEx TX II Motor Instrucciones De Montaje página 38

38 THERMEX TX II motor
INSTALLATION
The motor is sold for mounting with a Thermex hood. Always follow these instructions and the installation instructions for the hood carefully to
ensure that the product is installed correctly.
NOTE:
The motor has the option of
reversible vent. If it is not desired,
turn to point 8 in the installation
instructions.
NOTE: Always use the original exhaust dimen-
sion. By reducing the exhaust dimensions, the
performance decreases and the sound level
increases.
1
Take the motor box out of the condenser box.
4
Remove the blind plate on the side of the motor
box and mount it in the opening where the mo-
tor was located. Note: The plate is tightened
with nuts on the inside of the motor box.
8
2
x4
Remove the side of the motor box and un-
screw the motor.
5
x4
cut the marked hole in the side of the conden-
sate box. Use the round piece of flamingo to
insulate the now open hole in the box.
1
3
x8
Take the motor out of the motor box.
6
Put the motor box back in the condenser box so
that the openings in the motor box and the con-
denser box match up..
M 225191200215032021