Tools Of The Trade - Orion XTR2502 Manual Del Propietário

Ocultar thumbs

Contenido

100

Tabla de contenido

Idiomas disponibles

NOTE: Make sure all the equipment in the system is turned off when

making or breaking connections to the input RCA's or speaker termi-

nals . turn on the system and slowly turn up the volume control only

after double checking all wire connections .

Power for systems with a single amplifier can be supplied by most auto-

motive electrical systems . systems with multiple amplifiers may require

a higher capacity battery, alternator or the use of a storage capacitor .

We strongly recommend the use of a Directed Audio essentials power

capacitor with an extra battery in larger stereo systems .

orion amplifiers generate a certain amount of heat as part of normal

operation . Be sure the area around the amplifier is unobstructed to

allow adequate air circulation . Remember, beach blankets, last week's

laundry, school books and homework papers located on top of the

amplifier do not improve air flow and may become damaged .

You must first remove the end caps to mount the amplifier (mount-

ing holes are within) . (1) Remove the screws first, (2) lift the end

cap straight up to detach from unit and then (3) pull away from the

amplifier . once mounted replace end caps by following this process

in reverse .

Figure 13

Figura 13

Abbildung 13