Urmet 1092/147 Manual De Instrucciones página 5

Remove the clear dome from the minidome camera by loosening the three screws using the
wrench provided with the dome. In this way, the holes used for fitting the minidome camera to
the bracket itself can be accessed.
Insert the camera connection cables in the bracket and make them exit from opposite side of the bracket.
Fix the camera to the bracket using the four screws and the respective circular black seals
contained in the kit.
Put the previously replaced clear dome of the minidome camera back and fasten it using the
three screws and the specific wrench provided.
DS1092-195B
Use the indicated holes to fix
the minidome camera to the
bracket
5