Temperature Alarm; Door Open Alarm - Hotpoint UH8 F2D XI 2 Instrucciones De Use

2. FUNCTIONS
2.1. SMART DISPLAY*
This function can be used to save energy. Please follow
the instructions contained in the Quick Start Guide to
activate/deactivate the function. Two seconds after activation of the Smart Display, the display goes off.
To adjust the temperature or use other functions, it
is necessary to activate the display by pressing any
button. After about 15 seconds without performing any
action, the display goes off again. When function is
deactivated the normal display is restored. The Smart
Display is automatically disabled after a power failure.
Remember that this function does not disconnect the
appliance from the power supply, but only reduce the
energy consumed by external display.
Note: The declared appliance energy consumption
refers to operation with the Smart Display function
activated. This function is available only on the model
with User Interface on the door.
2.2. ON/STAND BY
This function turns On/Stand-by the freezer
compartments. To put the product in Stand-by, press &
hold the On/Stand-by button
the appliance is in Stand-by, the light inside the freezer
compartment does not work. Remember that this
operation does not disconnect the appliance from the
power supply. To switch the appliance On again, simply
press the On/Stand-By button
*Available on selected models only. Please check on the QUICK START GUIDE if this function is actually available on your model.
for 3 seconds. When
.
228
2.3. BLACK OUT ALARM
After a power blackout, your product is designed to
automatically monitor the temperature in the freezer
when electricity is resupplied. If the temperature in the freezer rises above freezing level, the Black Out
indicator turns on, the Alarm indicator
and the acoustical alarm sounds when electricity is
resupplied.
To reset the alarm press the Stop Alarm button
once.
In case of Black Out Alarm, the following actions are
recommended:
• If the food in the freezer is unfrozen but still cold, all
the food in the freezer should be eaten within the
next 24 hours.
• If the food in the freezer is frozen, this indicates the
food was thawed and then refrozen when electricity
was re-supplied which degrades taste, quality
and nutritional value and also could be unsafe. It
is recommended to not consume the food but to
dispose of the entire content of the freezer. The
Black Out Alarm is designed to provide guidance on
food quality in the freezer in the event of electricity
black out. This system does not guarantee food
quality or safety and consumers are advised to use
their own judgment in evaluating food quality in
freezer compartment.

2.4. TEMPERATURE ALARM

The acoustic alarm sounds and temperature indicator
(°C) blinks. The alarm is activated when:
• The appliance is connected to the power supply
after prolonged disuse
• The freezer compartment temperature is too high
• The quantity of fresh foods loaded into the freezer
exceeds that indicated on the rating plate
• The freezer door has been left open for a long time.
To mute the alarm buzzer press Stop Alarm button
just once. The Alarm indicator
turned-off as soon as the freezer compartment reaches
a temperature below -10°C and the temperature set
indicator (°C) stop blinking and shows the chosen
setting.

2.5. DOOR OPEN ALARM

The Alarm icon lights up blinking and the acoustic
alarm sounds. The alarm is activated when the door
is left open for more than 2 minutes. To disengage the
door alarm close the door, or press once Stop Alarm
button to mute the acoustic alarm.
blinks
just
is automatically