Double Din Radio Provision - Metra Electronics 95-5820 Instrucciones De Instalación

1. Slide the appropriate side bracket cover
the mounting legs of the double DIN trim
plate aligning the holes in the trim plate
and the bracket and rotate inward.
(Figure A)
Note: The notch in the housing
should be on top.
2. Slide the radio into the bracket/radio
housing assembly and secure the
radio to the assembly using the screws
supplied with the radio. (Figure B)
3. Cut and remove half of the top (2)
mounting legs with the brackets
attached. (Figure C)
4. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
5. Reassemble dash in reverse order
of disassembly.
Kit Assembly 95-5820

Double DIN radio provision

(Figure A)
(Figure B) (Figure C)
5
CUT HERE - TOP LEG ONLY
TOP LEG ONLY
CUT HERE
CUT
CUT