Troubleshooting; Environmental Protection - Worx WX255 Manual Original

TROUBLE SHOOTING
Problem
Battery will not charge
Switch cannot be pressed
Driver stops during driving screws
18
Bit Cartridge will not rotate when
Cover slides.

ENVIRONMENTAL PROTECTION

Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist.
Check with your local authorities or retailer for recycling advice.
Possible cause
1. Charger not plugged into a
working outlet.
2. Surrounding air temperature is
too hot or too cold.
Forward/Reverse switch at middle
position
Driver battery is out of power
The cover is not fully open
Solution
1. Plug charger into a working
outlet. Check current by plugging
in a lamp.
2. Move charger to an appropriate
place which temperature is suitable
for the charger.
Make sure switch is on Forward
or Reverse rotation according to
project need.
Make sure the driver is fully charged
before using it.
Make sure the Cover is fully open
and past the red line on the tool.