To Set Up; To Use - Beurer FT 65 Instrucciones De Uso

11. Date
12. Time
13. Measurement mode (Ear/Forehead/Object)
14. Low Battery Indicator
15. Temperature Measurement
16. Memory storage space number
17. Measurement in Progress Indicator
18. Unit of measurement (°C or °F)

5. To Set Up

Before first use, pull out the clear battery isolation strip to activate the batteries.
Setting the time and date:
1. With the device switched on, press and hold the SET Button for about three seconds; the Celsius/Fahrenheit scale indicator
will appear on the LCD Display. Press the SET Button again to select Celsius (°C) or Fahrenheit (°F). Press the M button to
save and continue.
2. The time format option flashes on the display.Use the SET button to select 12 or 24-hour time format and confirm with the
M button. Press the M button to save and continue. The year will appear on the LCD Display. Press the SET button to set
the year and then press the M Button
3. Continue in this fashion to set month, day, hours, and minutes, in turn.
4. Press the M button

6. To Use

NOTICE: Before each use, make sure the thermometer, and especially the sensor, are undamaged. Note that the thermometer
should be in the same room where it is to be used for at least 30 minutes in order to acclimatize it.
to save and continue.
to save and exit; the device will shut off.
11
88:88
12
13
14
10
8
18
17
15 16