Circuit Diagram - Telstar THL014010YL Manual De Instrucciones

SÍNTOMA
Air in inlet hose
Inadequate supply of mains water
Machine
Nozzle partially blocked
pulsating
Water filter blocked
Hose kinked
Machine often
starts and Pump/spray gun is leaking Centre.
stops by itself
Machine Pump/hoses or accessory frozen
starts, but no No water supply
water comes Water filter blocked
out Nozzle blocked
In case problems other than the above occur, please contact your local distributor.

10. . CIRCUIT DIAGRAM

CAUSA
28
ACCIÓN RECOMENDADA
Pressure resumes.
Check that the water supply corresponds to
specifications required
NB! Avoid using long, thin hoses (min. 1/2")
Clean the nozzle
Clean the filter
Straighten out hose.
Contact your nearest Service
Wait for pump/hoses or accessory to thaw.
Connect inlet water.
Clean the filter
Clean the nozzle
HIGH PRESSURE WASHER
THL014010YL