Dehumidification; Air Purification - BALAY 3XD620H Instrucciones De Uso

Instructions for use
Function

dehumidification

In this operation function, the appliance
reduces the humidity in the atmosphere.
The appliance purifies the air in the room
at the same time in order to create a
pleasant atmosphere.
• Check that there is no water in the
outdoor unit by removing plug C, Fig. 2.
Put it back in position after extracting the
water.
• Transport the outdoor and indoor units
to the room you wish to dehumidify. See
Transportation requirements.
• Plug the appliance into the mains
electricity supply.
• Lift air director A, Fig. 1, and, if you
wish, open side fins L, Fig. 1 (see "Side
fins")
There are two ways of expelling
condensed water: via removable tank P,
Fig. 1 and in continuous mode.
Dehumidification via the
removable tank:
• Check that the tank is fitted properly (the
symbol on the display screen
indicates that it is not) and that plug C,
Fig. 2, is in position to prevent water
from leaking onto the support surface.
• Select the dehumidification function
(see "Selecting the operation function").
• Select the operation speed, (see
"Selecting the speed").
• The water level in the removable tank
rises. When it reaches its maximum level,
the appliance beeps twice and the
symbol appears on the display
screen.
• Extract the tank and pour the water
carefully down the nearest drain.
Dehumidification in continuous mode:
• Place a receptacle at the outlet of tube
O, Fig. 1 to collect the condensed water
or direct it to the nearest drain.
• Remove plug N, Fig. 1. When operating
in this mode, the appliance does not
stop or warn that the receptacle is full by
beeps twice or via the symbol
• Select the dehumidification function
(see "Selecting the operation function").
• Select the operation speed, (see
"Selecting the speed").
Important
The amount of water dehumidified
may vary depending on ambient
conditions (See "Technical
Information").
When the appliance is operating in the
dehumidification function, the
temperature does not appear on the
screen and cannot be selected or
modified.
Warning!
Do not forget to fit plug N, Fig. 1 when
you change function. Otherwise the
appliance will shed water when
operated.
Remember that ambient temperature
must be 18ºC or higher in order for the
appliance to work.
In this operation function, room
temperature rises slightly.
Function

air purification

The air inside the room (ventilation) is
circulated through a filtering system when
the appliance is set to this function.
The appliance comes with a basic filter
(already fitted on the appliance) and a
double active filter to be fitted by the user
(see "Fitting the purifying filter") against:
- Smells and smoke.
- Pollen, bacteria and dust.
• Plug the appliance into the mains
electricity supply.
• Lift air director A, Fig. 1, and, if you
wish, open side fins L, Fig. 1 (see "Side
fins")
64
.