Tabla de contenido
Idiomas disponibles
Idiomas disponibles
> English
Maintenance recommendations
To open the container for cleaning, unscrew the lid.
The motor and float switch assembly can be pulled out for removal of hair or debris.
If necessary, remove the filter and wash it.
To remove or replace the power cartridge
Lift tab and rotate the two fins in a counter clockwise direction and lift out.
To reinstall, first make sure that the seal is properly located. Coat the seal with a
light film of vegetable oil or mineral oil, then align the two cams on either side of the
power cartridge with the two slots in the outer housing. Press down and twist in a
clockwise rotation. To ensure that the power cartridge is properly located, twist fins
in a counter clock-wise direction without lifting tab. Cartridge should stay in place.
Remove
Waste handling/material recycling
At the products end of life, please dispose of the product according to applicable
law. Where applicable, please disassemble the product and recycle the parts
material.
6
Reinstall
Lift tab
Seal
Original instructions
Tabla de contenido
