Cleaning And Care - Klarstein 10034654 Manual Del Usuario

EN
16
TROUBLESHOOTING
Problems
The appliance
does not work.
The cooling ef-
fect is not good.

CLEANING AND CARE

WARNING
Danger of electric shock
Always remove the plug from the socket-outlet and allow the fan
blower to stop acting before cleaning it.
Do not immerse the unit in water.
• After stopping cool, please keep it run for at least 1 hour to blow the honeycomb
dry and avoid the mustiness..
• Clean the external surfaces of the unit with a soft damp (not dripping wet) cloth.
• Do not use any cleaning chemicals such as detergents and abrasives.
• Do not allow the interior (special for the PCB) to get wet as this could create a
hazard.
• After extended periods of use, be sure to replace the water in the tank with fresh
clean water at least weekly. Also remember to clean the filter by unscrewing the
filter and removing the filter cradle. It should be cleaned in a mild soapy solution
and then left to dry before replacing the filter.
Possible reasons
The plug is not securely
inserted into the socket
or not connected well.
The ON/OFF but-
ton is not pressed.
Not enough water
the water tank.
The water pump
is blocked.
The air vent is
blocked by dust.
Solutions
Insert the plug pin into
the wall socket and make
sure it is connecedwell.
Press the ON/OFF button
after being plugged.
Add water to ensure ther is
enough water for puming..
Clean the water tank and
remove the impurities.
Clean the dust or foreign
objects from the air vent.