Cleaning And Maintenance; Technical Specifications - Perel PCS18501 Manual Del Usuario

f. Dust extraction (fig. A)
The dust extraction connector together with an external vacuum cleaner takes care of dust extraction.
• Connect an adapter to the exhaust if necessary.
• Connect a vacuum cleaner to the exhaust.
g. Switching ON/OFF
• switching on: keep the unlock button depressed while pressing the ON/OFF switch
• Switching off: release the ON/OFF switch

6. Cleaning and Maintenance

CAUTION: Disconnect from mains before starting maintenance operation.
1. All screws or parts of the device have to be tightly connected and must not be corroded.
2. There must not be any deformations on the housing and its accessories.
3. Moving mechanic parts must not show any traces of wear and tear and must be able to rotate unimpeded.
4. The electric power supply cables must be free of damage. Have a qualified technician service the device.
5. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
6. After operation, clean out the ventilation slots with compressed air (3 bar max.) to prevent the build-up of dust.
7. Lubrication of the machine should be done at regular intervals. Apply a drop of oil to the thread of the fixing screw
(2) (see fig. E).

7. Technical Specifications

Power supply
Power consumption
Speed
Blade diameter
Cutting depth
Vibration level
Sound pressure level
Sound power level
Protection class
Weight
* measured according to EN 50144
Note: The EC Declaration of Conformity is attached.
The information in this manual is subject to change without prior notice.
PCS18501
max. 230V~ / 50Hz
1200W
4500rpm
Ø185mm
55mm at 0° - 38mm at 45°
2.5m/s²*
98dB (A)*
111dB (A)*
II /
4.8kg
6
PEREL