Honeywell DLC203AE Serie Manual De Instrucciones página 6

USE & OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)
COOL
Press the COOL button until
cooling. The water pump will operate and you will feel the cooler air after the Honeycomb Cooling
Media is completely wet. When the
fan only mode, without evaporative cooling.
WARNING: Please ensure sufficient water is in the water tank otherwise the
display screen and the cooler will start in a Fan only mode without evaporative cooling.
MEMORY FUNCTION
This unit has a memory function. When the unit is turned off the unit memorizes the last setting.
When the unit is switched on again the unit will operate under the previous settings.
AUTO-OFF FUNCTION
If no buttons are pressed on the unit or remote control after a 15 hour period, the unit will
automatically turn OFF (except in Sleep Mode).
FILTER ALERT
When the unit has an accumulative working time up to 200 hours, the
Switch the unit OFF and carefully remove the filter from the unit and clean.
Replace the filter and switch ON the unit. Hold the
the Filter Alert indicator light.
Filter Alert Light should not be illuminated until the filter requires cleaning again.
The frequency of filter cleaning depends on room environment conditions. Some rooms may require
changing more frequently than others.
is illuminated on the display screen. This activates evaporative
is not illuminated on the display screen, the unit switches to a
button for approximately 2 seconds to turn off
EN 5
will flash on the
will be illuminated.