LNB ARM/ASTRA1
Command 1 or A
INSTALLATION
•
Place, when viewing from the top, the LNB with the left feedhorn in the
LNB arm.
•
Connect the coaxial cables to the 1, 2 or 4 outputs (depending on
model)
•
Set the Diseqc positions in the receiver (Command 1 or A for Astra 1,
Command 2 or B for Astra 3)
•
Because the signal of Astra 3 is weaker then Astra 1 it is better to
optimize the reception on Astra 3. Then Astra 1 reception will be fine.
•
Turn the LNB with the Astra 3 feed a little upwards until the maximum
signal strength.
•
The LNB works best with a 80 cm dish, and is also suitable for 60 cm
dishes.
TOP VIEW
ASTRA3
Diseqc (V1.0/V2.0)
Command 2 or B
1