Fellowes Powershred 60Cs Manual De Instrucciones página 3

ADVANCED PRODUCT FEATURES
SAFESENSE
Stops shredding immediately when hands touch the paper opening.
SET-UP AND TESTING
1
2
)
look for the SafeSense
to activate SafeSense
®
indicator to illuminate
BASIC PRODUCT MAINTENANCE
OILING SHREDDER
If not oiled, a machine may experience diminished
sheet capacity, intrusive noise when shredding and could
recommend you oil your shredder each time you empty
your waste bin.
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
TROUBLESHOOTING
operation and recovery time for this shredder.
SafeSense ® Indicator: If hands are too close to the paper entry, the SafeSense
PAPER JAM
1 2
Set to Reverse ( ) Alternate slowly back and forth
LIMITED PRODUCT WARRANTY
defects in material and workmanship and provides service and support for 1 year from the date of
purchase by the original consumer. Fellowes warrants the cutting blades of the machine to be free
from defects in material and workmanship for 5 years from the date of purchase by the original
consumer. If any part is found to be defective during the warranty period, your sole and exclusive
warranty does not apply in cases of abuse, mishandling, failure to comply with product usage
standards, shredder operation using an improper power supply (other than listed on the label), or
unauthorized repair. Fellowes reserves the right to charge the consumers for any additional costs
® TECHNOLOGY
3
SafeSense is active
®
and working properly
®
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
1
( )
® indicator will illuminate and the shredder will stop shredding.
3 4
( )
and unplug
2 3
*Apply oil across entry
Set to Reverse (
for 2-3 seconds
5 6
Gently pull uncut paper
and resume shredding
from paper entry. Plug in.
incurred by Fellowes to provide parts or services outside of the country where the shredder is initially
service under this warranty, please contact us or your dealer.
)
)
3