Black+Decker WP600K Manual De Instrucciones página 15

string. Be surethe excess string is firmly rucked inside
the wool bonnet to prevent ittrom flying out while
polishing.
Caution! Improper fitting of the wool bonnet may cause
vibration.
4. To remove the wool bonnet follow the above
procedures in reverse.
APPLICATIONS
1. Polishing varnished surfaces of wooden furniture, etc.
2. Shining synthetic resin or ebonite products.
3. Fiber Glass polishing applications
4. Automotive polishing
Practical electric polisher appliactions
When utilizing this tool as a polisher, set the speed to a
lower speed for maximum efficiency.
1. Curved surfaces as well as flat surfaces can be
efficiently finished. Do not excessively push the
polisher against the surface of the material. The
weight of the polisher alone is sufficient for effective
polishing. Excessive pressure will result in a poor
finish and cause possible overload to the motor.
2. Sanding disc polishing compound or wax should be
selected in accordance with the material and the
desired surface finish. Maximum polishing compound
and /or wax. Apply a small quantity of compound
and /or wax on material surface and polish with the
wool bonnet.
LIMPIEZA
Compressed dry air blow may be the most effective
cleaning method. Always wear safety goggles when
cleaning tools with compressed air.
Ventilation openings and switch levers must be kept
clean. Do not attempt to clean by inserting pointed objects
through openings.
No chemical agent is allowed to be used in cleaning the
power tool.
MAINTENANCE
Keep guards, air vents and the motor housing as clear as
possible of dust and dirt. Wipe with a clean cloth and blow
through with a low-pressure air supply. Excessive build-up
of metal dust can cause tracking of electrical current from
the internal parts to exposed metal parts.
Warning! Before performing any maintenance, switch
off and unplug the tool.
Important! To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment (other
than those listed in this manual) should be performed
by authorized service centers or other qualified service
personnel, always using identical replacement parts.
Carbon brushes
The brush and commutator of the tool shall be
examined for several months. Their good contact
makes the tool energetically. When the spark around
the commutator become greater the carbon brushes
should be changed.
ACCESSORIES
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
Warning!The use of any accessory not recommended
for use with this tool could be hazardous.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement,
or if it is of no further use to you, do not dispose
of it with household waste. Make this product
available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials. Local regulations may
provide for separate collection of electrical
products from the household, at municipal waste
sites or by the retailer when you purchase a new
product.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned
and authorized service locations. All BLACK+DECKER
Service Centers are staffed with trained personnel to
provide customers with efficient and reliable power tool
service. For more information about our authorized
service centers and if you need technical advice, repair,
or genuine factory replacement parts, contact the
BLACK+DECKER location nearest you, or visit us at www.
BlackandDecker-la.com
SPECIFICATIONS
Voltage
AR, B2, B2C
B3
BR
Power
No-load speed
Bonnet/Grinder diameter
Spindle screw thread
Weight
Cord
ENGLISH • 15
WP600K
220V
120V
127V
600W
1000 - 3000/min (rpm)
5" (127mm)
5/8"-11/M14
2,1 kg
2m