Hilti SIW 18T-A Manual De Instrucciones página 16

respiratory protection appropriate for the type of dust generated,
and designed to filter out microscopic particles and direct dust
away from the face and body. Avoid prolonged contact with dust.
Wear protective clothing and wash exposed areas with soap and
water. Allowing dust to get into your mouth, eyes, or to remain on your
skin may promote absorption of harmful chemicals.
5.2.2 Power tool use and care
a) Secure the workpiece. Use clamps or a vice to secure the work-
piece. The workpiece is thus held more securely than by hand and both
hands remain free to operate the power tool.
b) Check that the insert tools used are compatible with the chuck
system and that they are secured in the chuck correctly.
c) Ensure fastener and attachment will withstand the level of torque
generated by the tool.
damage the fastener/attachment and possibly lead to personal injury.
5.2.3 Cordless tool use and care
a) Do not expose batteries to high temperatures or fire. This presents
a risk of explosion.
b) Do not disassemble, squash or incinerate batteries and do not sub-
ject them to temperatures over 80°C (176°F). A risk of fire, explosion
or injury through contact with caustic substances may otherwise result.
c) Do not use batteries other than those approved for use with the
applicable power tool or appliance. Use of other batteries or use of
the battery for purposes for which it is not intended presents a risk of
fire and explosion.
d) Observe the special instructions applicable to the transport, storage
and use of Li-ion batteries.
e) Do not charge or continue to use damaged batteries (e.g. batteries
with cracks, broken parts, bent or pushed-in and/or pulled-out
contacts).
f) If the battery gets too hot to touch, this may indicate that it is faulty.
Place the tool in a location where it can be kept under observation,
well away from flammable materials, and allow it to cool down.
Contact Hilti Service after the battery has been allowed to cool.
Printed: 27.08.2013 | Doc-Nr: PUB / 5136086 / 000 / 01
Excessive torque may overstress, strip or
en
11