SATA AE1015 Manual De Instrucciones página 44

4.2.6
4.2.7
44
AE1015/AE1015-3/AE1015H/AE1015H-3
中文
EN
Place the column assembly on the cabinet with the warning label
facing forwards. Align the holes on the column base plate with the
screw holes on the cabinet. Re-screw the bolt, plain washer and
spring washer as shown in Fig. (4-1) with torque wrench according to
the tightening torque of 70 N•M (Fig. 4-2).
Fig. 4-2
Fig (4-3) Remove the screw (3) on the hexagonal shaft (1) with the
hexagon wrench and take off the vertical shaft (2). When removing
the screws of vertical cap, fasten the hexagonal shaft with the
locking handle to prevent it from slipping down, thus damaging the
machine or causing the personal accident!
Fig. 4-3
Fit the vertical spring (1) on the vertical shaft, mount the vertical cap
and fasten the removed screws, and screw the hand wheel (2) into
the nut sleeve of rocker arm (Fig.4-4).
Fig. 4-4
DE RU KO PT JA ES