oneConcept Woodpecker 10032984 Manual De Instrucciones página 18

EN
18
1 FM ANTENNA: Pull up and adjust it for a better FM radio receptions.
2 INPUT PORTS: for 2.1ch input jacks: to connect to CD/VCD player, TV/
PC, AUX, etc.
Player, for 5.1CH to connect with DVD player or other device with 5.1ch
output port.)
3 OUTPUT PORTS: To connect with 5 satellite speakers respectively. Insert
satellite cable to right output port of main unit i.e. Central satellite to Cen,
front right satellite to FR, front left satellite to FL, rear right satellite to
RR, rear left satellite to RL. (refer to the connection diagram ).
4 POWER ON/OFF: Press it to power on or power off the system.
5 AC POWER CABLE: To connect with AC power outlet.
Function keys on the remote control
1. STAND-BY:
2. MUTE:
3. Front(FR & FL) volume up
4. Sub-woofer volume up
5. Surround (SR & SL) volume up
6. Center volume up
7. Front (FR &FL) volume down
8. Sub-woofer volume down
9. Surround (SR & SL)volume down
10. Center volume down
11. Input mode
12. 5.1 simulation on a 2.1 channel audio output.
13. Main volume up
14. Previous sound (USB/SD/BT)
15. Play/Pause (USB/SD, BT)
16. Next sound (USB/SD, BT)
17. Main volume down
18. Continuous playing mode for a song (USB/SD input)
19. Continuous playing mode for all songs (USB/SD input)
20. Select to play numbered song (USB/SD input)
21. Select for sound effect ( POP/ROCK/JAZZ/CLASSIC/NORMAL)
22. Select to play on USD/SD input.
Use of remote control
1. For a better RF reception, to wave the remote control at an angle of 30 to
the Sensor located nearby the LED display. Also keep a working distance
of 5M.
2. The remote requires 2 pieces of battery UM-4 AAA (1.5V), open the
battery door and load 2pcs of UM-4 batteries in the direction show, then
replace the battery door.
3. If the system not use for a long time, take off batteries to avoid battery
liquid leaking out and damaging the components inside the remote
control.