Dyna-Glo DGX440SGP Manual De Usario página 25

Care and Maintenance
if these instructions are not followed, a fire or explosion may result, possibly causing serious
bodily injury or death.
Cleaning the Grill Burner assembly
– Make sure the grill and griddle are cool.
1. Ensure all burner ports are clear of clogs. Use of a pin or paper clip works well.
2. Ensure burner is free of any damage. If damage is found, replace with new burner.
3. Ensure the end of the burner and primary air screen are clear from insect nests, dirt or debris.
re-installing the Grill Burner assembly
Ensure that gas valve orifices are correctly positioned inside burner inlet (venturi).
The use of a flashlight may be necessary to ensure the correct position.
View the correct position through the firebox vent holes as shown in the figures below.
Reattach each burner with the hinge pin and reattach the ignition wire to electrode.
warninG
Figure 4
Figure 5
25