Technical Data; Warranty Notice - ANSMANN DCPS-NETBOOK Manual De Instrucciones

oPeration
1. Adjust the Output voltage switch (1) on the bottom side of the converter to the
correct output voltage (9.5V - 20V) using the key (2). Detailed information about the
correct voltage and polarity will be found inside the manual of the Netbook Computer,
or on the name plate of the original power supply.
Please note that incorrect voltage setting or polarity may damage your Netbook Com-
puter. If you are unsure, do not connect with your Computer. Consult your local dealer!
2. Connect the correct plug to the connector of the converter (4).
3. Insert the output plug to the appliance (E.g. Netbook Computer)
4. Connect the converter to the cigarette lighter socket in the car.
Ensure that the supply to the cigarette lighter socket is on. Some cars require the
ignition to be switched on.
5. Turn on the Netbook
6. After use, remove the converter from the cigarette lighter socket.

teChniCal Data

Prim.:
Sec.:
inCluDeD
> DCPS- Netbook
> Secondary plug set (6 different plugs)
> Operating instructions

warranty notiCe

ANSMANN offer a 3 year warranty with this device. This warranty does not apply to
damage caused by improper use. ANSMANN can not accept liability for direct, indirect,
accidental or consequential damages originated by not using the device as indicated
by the operating instructions.
Technical details are subject to change without prior notice. No liability will be accep-
ted for typographical errors or omissions. 09/2010
12V – 13.8V DC
9.5V / 12V / 14V / 16V DC – max. 3A
18.5V DC – max. 2.7A
19V / 20V DC – max. 2.5A