Tabla de contenido
Idiomas disponibles
Idiomas disponibles
u To prevent cross-threading, start your nuts/bolts by hand—and try to get a few
rotations—before continuing the job with your pneumatic tool.
The forward/reverse knob rotates as the ratchet is activated/triggered. Be sure to
u
keep your hands away from moving parts during operation—including this knob.
u The reactionless ratchet should never be used to set torque. Use a torque wrench
to attain the proper torque manually. Do not over tighten.
STORAGE
Lubricate your reactionless ratchet before storing. Follow the air motor
lubrication instructions with an exception to step #4. Only run the
reactionless ratchet for 2-3 seconds (instead of 10 seconds) because more oil
needs to remain in the reactionless ratchet when storing. Store your tool in a
cool dry place.
TECHNICAL SERVICE
For information regarding the operation or repair of this product, please visit
www.campbellhausfeld.com.
SAFETY INSTRUCTIONS
This manual contains information that is very important to know and
understand. This information is provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help recognize this information, observe the
symbols found on page 10. The Safety Symbols throughout this manual are
to alert you to important safety hazards and precautions.
With any piece of equipment, new or used, the most important part of its
operation is SAFETY!
Campbell Hausfeld encourages you to familiarize yourself with your new
equipment and stresses safe operation.
The next few pages of this manual are a summary of the main safety aspects
associated with this unit. Be sure to read and understand completely before
operating the machine.
The symbols used throughout the operation and maintenance sections of
this manual call attention to safety procedures.
Important Safety Information
Please read and save these instructions. Read carefully before attempting to
assemble, install, operate or maintain the product described. Protect yourself
and others by observing all safety information. Failure to comply with
instructions could result in personal injury and/or property damage! Retain
instructions for future reference.
BEST PRACTICES
The DANGER, WARNING, CAUTION, and NOTICE notifications
and instructions in this manual cannot cover all possible condi-
tions and situations that may occur. It must be understood by
the operator that caution is a factor which cannot be built into
this product, but must be supplied by the operator.
5
Tabla de contenido
