Attach The Pan/Tilt Unit To The Base Unit - Axis Q86–E Serie Guia De Instalacion

AXIS Q86–E Series
1
Base unit
2
Seal
3
Washer (4x)
4
Alignment indicator
5
Washer (4x)
6
Screw (4x)
7
Column bracket
8
Wall bracket

Attach the Pan/Tilt Unit to the Base Unit

NO TICE TICE
NO NO TICE
Use the alignment indicators to align the units. Incorrect alignment could cause damage
to components.
Important
• Assemble the product in an upright position. Do not install the product upside down.
• Make sure to connect the pan/tilt unit straight from above as shown in the illustration.
Do not tilt it onto the base unit.
1. Make sure the seal is in position.
2. Tilt the camera housing back.
3. Attach the pan/tilt unit to the base unit and tighten the screws (torque 4 Nm) using the
supplied allen key.
1
2
3
4
5
6
7
1
2
3
4
5
6
18
8