Joolz Day Manual De Instrucciones página 12

EN INSTRUCTION MANUAL
Dear Joolz Day user,
We would like to congratulate you on choosing the Joolz
Day. The Joolz Day is not only technically sophisticated,
but also unique, original and out of the ordinary. It is
handy for you and comfortable for your child.
Note: D on't forget to fill in the warranty card on
the website.
IMPORTANT: Read these instructions carefully before
usage and keep them for future reference.
Make sure that you have all the diagrams to hand before
assembling the Joolz Day. The diagrams are printed on the
inside of the front cover of this instruction manual.
22 | instruction manual
1. Unpacking the Joolz Day
Check the content of the boxes before assembling the
Joolz Day. Contact your retailer if something is missing.
The following components should be included in the
various boxes:
Box 1 1 chassis
1 seat frame
2 front wheels (swivel wheels)
2 rear wheels (pneumatic tires)
1 safety bar (carrying handle)
1 raincover
1 instruction manual
1 sun hood frame, incl. fabric
Box 2
1 seat fabric
1 shopping basket
If you also purchased the Joolz Day cot, the third box
contains the following components:
1 cot frame, incl. fabric
Box 3
1 cot cover
1 sun hood frame, incl. fabric
1 hypoallergenic breatable mattress
Note: P lease check availability of items included on the
sticker of the box for special or limited editions of
the Joolz Day.
2. Assembling the Joolz Day
1. Unfolding the chassis – figures 1-2
To unfold the Joolz Day pull up the handlebar (1) with one
hand until you hear a click.
2. Attaching the rear wheels (pneumatic tires) – figures 3-4
Attach the rear wheels to the axle of the chassis by pushing
in the button (10) in the middle of the rims until they click
into place.
3. Removing the rear wheels
Press the button in the middle of the rim (10) and pull
the wheel off the axle.
Note: M ake sure that the wheels are secure and check
the tire pressure. If necessary, inflate the tires.
The maximum tire pressure is 28 P.S.I. (2.0 bar).
4. Attaching the front wheels (swivel wheels) – figure 5
The front wheels (11) are simple to attach. Click the front
wheels into the front wheel holders on the front forks.
5. Locking the front wheels – figures 6-7
Press down the clip above the front wheels (13) with your
foot to lock the front wheels. The pushchair will only move
in a straight line. Pulling this clip upwards releases the
front wheels. The front wheels will swivel again, making
the Joolz Day easy to manoeuvre.
6. Removing the front wheels – figures 8-9
The front wheels can be detached by pushing the button
on the front of the front wheel holder (12).
7. Applying the brake – figure 10
The brake is situated on the bar between the rear wheels
(9). Press the pedal down with your foot to apply the brake.
To release the brake, press the other side of the pedal
down again with your foot.
Note: A lways hold the stroller firmly on sloping surfaces
even if the brake is engaged.
8. Attaching the shopping basket – figures 11-13
To attach the shopping basket (24) first place it over the
brake and attach the four straps between the rear wheels
using the push buttons. Then, connect the two straps in
the middle. Finally fix the two straps in the front using the
velcro strips.
| instruction manual
EN
23