Kohler K-2313 Guia De Instalacion página 5

Pinch wing nut closed to
insert into the lavatory hole
As Viewed From Below
4. Install the Lavatory to the Brackets
CAUTION: Risk of personal injury and product damage. It is recommended that two people install
lavatory to brackets.
Install assembled 1/8" bolts into the front holes of the lavatory as shown.
Place the lavatory on the brackets - as the lavatory is being lowered onto the brackets, pinch the
back toggle wing nuts so they fit into the holes located in the bottom rear of the lavatory.
Insert the bolts located towards the front into the slots located in the sides of the tie bar. CAUTION: Risk of product damage. Do not overtighten the bolts. Overtightening will damage the
lavatory.
Tighten down all the bolts.
Kohler Co.
Toggle Wing Nut
1/8" Bolt
Washer
5
Insert toggle bolt into slot
1012579-2-B