Initial Use; Unpacking; Accessories; Before Use - Parkside PTS 500 C3 Indicaciones De Funcionamiento Y Seguridad

Only use batteries recommended for this
¢
product (see "Technical data").
Observe the polarity (+ and -) when inserting
¢
batteries. Pay attention to the markings on the
product and the battery.
Remove batteries from the product if it is not
¢
to be used for an extended period of time.
Remove exhausted batteries promptly from
¢
the product.
Do not attempt charging non-rechargeable
¢
batteries.
Never expose batteries to extreme
¢
environmental conditions like heat, cold or
moisture.
Do not dismantle, open or shred batteries.
¢
Do not short-circuit batteries. Do not store
¢
them haphazardly in a place where they may
short-circuit each other or be short-circuited by
other metal objects.
CAUTION! RISK OF EXPLOSION
Never charge non-rechargeable
batteries! Protect the battery against
heat, e. g., against continuous intense
sunlight, fire, water and moisture.
Danger of explosion.

Initial use

Q

Unpacking

Q
WARNING!
The product and the packaging are not
u
children's toys! Children must not play with
plastic bags, sheets and small parts! There is
a danger of choking and suffocation!
1. Unpack all parts and lay them on a flat,
stable surface.
2. Remove all packing materials and shipping
devices if applicable.
3. Make sure the delivery contents are complete
and free of any damage. If you find that parts
are missing or show damage do not use the
product but contact your dealer.
Do not use the product unless missing
parts have been delivered in addition or
defective parts have been replaced. Using an
incomplete or damaged product represents a
hazard to people and property.
72 GB / MT
4. Ensure that you have all the accessories and
tools needed for assembly and operation.
This also includes suitable personal protective
equipment.

Accessories

Q
To operate this product safely and correctly, the
following accessories, i. e. tools and attachments,
are necessary:
Suitable personal protective equipment
o
Accessories and tools are available through your
authorised dealer. When buying always consider
the technical requirements of this product (see
"Technical data").
If you are not certain, ask a qualified specialist and
get advice from your trusted dealer.
NOTE
This instruction manual contains information
u
and suggestions for several attachments and
their uses. The attachments depicted are not
necessarily included in the shipment, but are
meant to indicate additional possibilities for
using this product.

Before use

Q
Attaching / removing the saw
Q
blade
WARNING!
Always switch the product off and
disconnect it from the mains before
performing inspections, installing
accessories or making adjustments!
WARNING!
Always use the correct blade according
u
to the intended use! Observe the technical
requirements of this product (see "Technical
data") when purchasing and using blades!
Blades are very sharp and become hot
during use! Handle them carefully! Wear
safety gloves when handling blades in order
to avoid injuries like burns and cuts!
Never press the spindle lock whilst the
u
spindle is rotating! The arrow on the blade
must correspond to the arrow showing the
direction of rotation (running direction shown
on the product).
Ensure that the blade is suitable for the
u
rotational speed of the product.