Telstar TLA018580MD Manual De Instrucciones página 27

AUTOMATIC WASHING MACHINE
TLA018580MD
INSTALLATION OF THE WASHER
Remove package
Remove package and take out the bottom board of the cabinet on the
foam cover.
Open the lid of washer's door and take out accessories.
A trial operation or washing on the foamed cushion is strictly forbidden.
Placement of upper water drain hose
The height of drain hose ("a")should between 86-100 cm.
Diameter of "b"shuld not less than 3 cm, and flow capacity not less than 40 L/
Min.
Before washing machine starts, user should hang up the drain pipe 86-100cm
height from the floor.
Installation of water inlet pipe
Put the water inlet pipe(which has metallic filtering bag)
screw on to the tap.
Tightly screw another end of water inlet hose on water inlet
valve . (with rubber seal ring inside).
Note: When tightening the clamping nut, evenly apply the
force and do not twist the water inlet valve to avoid breaking
of water inlet valve joint.
27