Zeiss Victory 32 T FL Serie Modo De Empleo página 7

Instructions for use
Congratulations on your outstanding new binoculars. Enjoy the impressive
experience of undistorted image reproduction which is distinguished by
perfect brilliance and excellent colour accuracy.
Carl Zeiss brand products are characterised by outstanding optical
performance, accurate processing and long durability.
Please observe the following instructions for use, so that you enjoy
optimum use of your product and it can be a faithful companion to you
for many years.
Viewing with and without glasses
If you do not wear glasses when viewing, use the binoculars with the eyecups
extended (Fig. 1/A). To do this, turn the eyecups upwards to the top click stop
position by turning them to the left (counter clockwise). The eyecups can be set to
four click stop positions – the positions at the top and bottom and two inter-
mediate positions (Fig. 2). These adjustment options permit the distance from the
exit pupil to be varied according to the specific requirements of each user.
If you wear glasses when viewing, turn the eyecups to the right (clockwise) to
the lowest click stop position as shown in Fig. 1/B.
Cleaning and changing the eyecups
The eyecups (complete modules) can be removed from the binoculars for
cleaning or exchange.
Turn out the eyecup counter clockwise to the stop, then unscrew it completely
via the thread (continue to turn in the same direction). After cleaning or ex-
change, turn the eyecup clockwise to the lowest click stop position. Then
attach the module to the binoculars, through the rubber edge of the eyepiece
tube, turn it in clockwise as far as it will go and tighten it.
Adjustment of the interpupillary distance
Adjust the two barrels relative to each other about the central axis until you
see one circular field of view when viewing with both eyes.
Focusing
The binoculars have a centre focusing mechanism (focusing knob Fig. 3/C)
and a dioptre adjustment wheel. Dioptre adjustment is activated by pulling
the focusing knob (Fig. 3/C) upward.
For focusing, close your right eye and focus the image in the left barrel using
the centre focusing mechanism (Fig. 3/C). Then close your left eye – and if
necessary – adjust the focus in the right barrel using the dioptre adjustment
wheel.