Installation Instructions - American Standard Townsend 2691 Instrucciones De Instalación

NOTE: Tub water ttings can be installed in one of 3 ways; Wall Mounted, Floor Mounted or Deck Mounted.
Location of the access panel must be considered BEFORE installation of the tub. The tub access
panel must be accessible if connecting deck mount llers. Drain connection can be mounted
through the access panel or through the oor.
1

INSTALLATION INSTRUCTIONS:

Place the tub on a finished, level floor in the desired location.
Using a marker, trace the outline of the tub drain hole onto the floor.
NOTE: If using existing P-Trap location, then skip to Step 3.
2
Install the P-Trap in the marked drain location. P-Trap is installer provided.
3
Place the tub again in the desired location with the drain hole directly in line with the P-trap.
Using an erasable marker or pencil, trace the outline of the tub on the oor (see Fig. 1).
4
Using the adjustable feet on the underside of the tub, ensure that the tub is level.
Ensure that there is a gap between the tub base and the floor. Gap shall not exceed 3/16" (5mm). (See Fig. 2)
3/16" MAX
(5mm)
FINISHED FLOOR
FIG. 1
FIG. 2
2
755423-100 Rev. 1 3/19